How to create a DOS bootable USB for a BIOS update
Last updated:
Some BIOS and firmware updates, mostly for older motherboards, storage controllers and network cards, run only from DOS. Rufus can make a bootable FreeDOS drive for them in about a minute.
Check whether you need DOS at all
Most PCs made in the last ten years can update their BIOS from inside the firmware setup screen (for example ASUS EZ Flash, MSI M-Flash or Gigabyte Q-Flash) or with the maker's Windows program. Those methods are safer and simpler, so use them when the maker offers them. Use a DOS drive when the instructions for your update call for one.
Steps
- Download the BIOS update for your exact model from the maker's support page, and read its instructions.
- Plug in a USB drive, start Rufus and choose the drive under "Device". Any size works; FreeDOS is tiny.
- Set "Boot selection" to "FreeDOS".
- Leave "Partition scheme" on "MBR" and "File system" on FAT32, then press "START" and wait for "READY".
- Open the drive in File Explorer and copy the BIOS file and the maker's flash program onto it.
- Restart the PC, open the boot menu and choose the USB drive. If it is not listed, enable "Legacy boot" or "CSM" in the firmware settings first.
- At the DOS prompt, type the command given in the maker's instructions and press Enter.
- Wait until the tool says it has finished, then restart.
Safety checks
- Use only the file for your exact model and hardware revision. The wrong file can leave the PC unable to start.
- Do not switch off or restart during the update. Keep a laptop on mains power with a charged battery.
- Write down any firmware settings you changed. An update usually resets them to defaults.
If the PC cannot boot FreeDOS
FreeDOS needs legacy BIOS or CSM boot. Many PCs made since about 2020 are UEFI-only and cannot start it at all. On those, use the update tool built into the firmware or the maker's Windows updater instead.
On a non-US keyboard, Rufus sets the DOS keyboard layout to match your Windows region, so the keys type what you expect.